coat hooks
 

Did the 65 hardtop use one or two coat hooks? I don't remember how many I took off but I only have one.

Mine only has one. That's certainly not the final word, but it's what I'd bet is correct.

Mine has I per side

My 64 hardtop with original headliner, built in February at the Freemont plant has only one, located on the drivers side. Thanks for posting the question as it was on my mind also. It would be interesting to know if there was a reason why some cars have one and others two such as the plant where manufactured, optional equipment, etc. The reason I mentioned having the original headliner is that a friend who restored a 65 added a second coat hook after replacing the headliner, thinking that was how it was supposed to be.

For what it is worth, my 66 is Fremont built (01B) and only has "one" coat hook on the LH side.

I replaced what was left of the original headliner 30 yrs ago and never reinstalled the hook[s]. I am now replacing the headliner again and figured this would be the time to mark the hook locations. I'll check my dads 66 to see how many it has.

My '65 has the original headliner Fremont built and has 1 coat hook per side.

brut4s, Is your car a post body?

No it is not.

What they did get and what they should have gotten can be two different things.

According to the '66 Parts Catalog all '41 up Pontiacs are shown as using (2) coat hooks per car EXCEPT for Convertibles.

It looks like Convertibles did not get Coat Hooks until the '65-'66 Convertibles which are listed as using (1) per car.

No distinction is given between Tempests and big Pontiacs.

The '65-'66 convertible also lists a different p/n compared with all the others, 4895704.

The others all show 4840719. This p/n seems to have been very common for GM cars thru '66, always indicating 2 per car from what I noticed.

Our 65 has the original headliner; 1 coat hook. Car was built in Pontiac. I have wondered this question for a while!

Don.

coat hook
 

Service Craftsman News No. 1-1964

John great catch!

I had looked thru the SCNs, scanning the indexes, but missed that one. Was looking for "Coat Hook" in the alphabetical list, never saw the listing for "R.H. Coat Hooks".

Settles it for me.

I'm still going with no coat hook for the '64 convertible (Lemans or Tempest Custom) unless somebody knows differently?

The Hook
 

Left hand coat hook - 64 GTO Convertible - Original Owner.

I went to the dry-cleaner the other day and looked - I've got hooks on both sides! It's some other car I owned in the past with only one...

Okay, I checked my top frame. No coat hook but it DOES have a screw hole about that same location. No screw hole on the right side.

So now I need to know, was the coat hook for the '64 convertible the same as the one in the coupe? If so, I wonder why the convertible hook was different for '65?

Picture shows the coat hook from my 64 GTO conv and my 64 GTO HT.
Conv is the small hook - a zinc casting.
HT is the large hook - a sheet metal stamping

Jim, excellent. FWIW, it looked like a different hook in the picture, I'm glad you have the confirmation. I bet the coupe hook either would poke at the top or snap off when the top was dropped, either way, they were compelled to issue a specific coat hook for the convertible.

I googled it and looks like PY offers the convertible hook as a repro. PY190, $11 each.

Interesting that they offer the coupe hooks by the pair.

I feel for you '65 & '66 guys. The SCN applies to '64. Wonder if the RH coat hook continued to be a dealer only thing for '65?

If you have 2 hooks in a '65 or '66, no way to know if the RH was dealer added or factory since the screw hole was always provided.

At least the '64 guys can be sure. One factory hook only, different hook for the convertible. Least that's my conclusion. Other opinions may vary! :)

One coat hook for me; LH side, the long one like shown at the top of jtea's pic.

Early September of 1964 Pontiac build.

K

Hard Tops got the long chrome stamped steel as mentioned above and the Convertibles got the little stubby chrome hook (big enough for one hanger).

The small style hook was used for the convertibles from 64 to 67.

First two pics below show 66 Convertibles with a LH hook.

Third pic shows a 67 Convertible with this hook (very difficult to see, but it's there when zoomed in).

Last pic shows a 66 Hardtop with the long stamped hook.

PS - location seems to vary a bit in the pics of the convertible frames.