|
64 restore
5 Attachment(s)
hear are a few picks of the car going-to the top shop
|
Where the burnout pic????
Very nice and detailed. So that is what the dual belt setup looks like. What is the hood switch for? Under hood light I assume? |
very nice, keep the pics coming
|
SWEET!
Tom V. Have them put a oversized top on the car and in a few years when it shrinks some you will not have the bow upward at the door opening. |
Awesome Brody.
|
Very nice Brody, can't wait to see the end product. rohrt, dual belt system is 1st design on early 64's.
|
Nice job , looks excellent .
|
Wonderful Brody!! Don't forget the TIC TOC> "Bill"!
|
throttle cable
bv,
From your pic the throttle cable looks nice & straight from the firewall to the bracket. Mine curls up and then down to the bracket. No matter how much I lube it it's balky and stiff. The liner is in good condition but there is just too much friction. Is your cable original or a repop, if repop where did you buy it? I'm tired of fighting mine. best regards |
Hi GTO Ron, From past posts on this subject, I will bet your cable is for a 4V. They are 1 inch longer than the 3X2 cable. I am surprised Ron Cuzzo has not already posted this. He fought the same problem during his resto. the 3X2 cable is 17 3/4 and the 4V is 18 3/4. Also the plastic cable cover at the carb end should be a grayish color, not blue or red. Hope this helps. "Bill"!
|
I don't know the details of Brody's cable, but the reason it looks so straight in that picture is because the throttle cable bracket isn't bolted to the intake yet.
|
Do you have more pics of the engine bay you could share?
|
64 restore
4 Attachment(s)
ok hear are the latest picks with 21 days to go
|
64 restore
4 Attachment(s)
a few moor
|
64 restore
last
|
64 restore
3 Attachment(s)
last picks
|
Wow. Such a nice car. Wow!
Hey, there's one angle/view of the engine bay that I was interested in and of course it's the one that's unclear (shaky hands I guess LOL). No rush at all, but if you have a better shot of this angle (passenger side area) I'd love to see it. I'd like to get my wiring cleaned up and looking a bit closer to stock. THANKS! http://forums.maxperformanceinc.com/...3&d=1414605970 |
Hi Brody. Time is catching you!!! Gonna make it?? Good luck! "Bill"!
|
64 restore
4 Attachment(s)
hi all well with 5 days to go i think it will make it last buff to night and a few days to clean i could not have gotten this far with out every one on this boards help a few picks later brody
|
64 restore
5 Attachment(s)
a few moor
|
| All times are GMT -4. The time now is 08:18 AM. |