PY Online Forums - Bringing the Pontiac Hobby Together
Page 1 of 6 1 23 Last »
Show 50 post(s) from this thread on one page

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Pontiac - Race (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=419)
-   -   Best Hi-Port porters? (https://forums.maxperformanceinc.com/forums/showthread.php?t=766739)

SLICK1 12-23-2014 01:55 PM
Best Hi-Port porters?
 
Not trying to start a battle or debate, just trying to be pointed in the right direction of the person known to be the most knowledgeable with these heads, it can be hand porting or CNC program?

Thanks in advance and Happy Holidays to all.....:cool:

ponjohn 12-23-2014 02:49 PM
SD has a good port even though they don't advertise it.

Also Jim Robertson comes to mind.

jm455ho 12-23-2014 03:51 PM
Second for Jim Robertson. I know he's had at least two sets go through his hands.

Skip Fix 12-23-2014 04:02 PM
Dan Barton has several sets at least he has done.

GTO 12-23-2014 04:05 PM
1 Attachment(s)
You prob. seen my flow sheet before but here it is again. For around $3500 back then, it was a good deal.

slowbird 12-23-2014 07:25 PM
Dan Barton hands down!

Aaron Quinton 12-23-2014 07:40 PM
KRE, SDPerf and BES can make them go. I do not have experience with others.

Tom Vaught 12-23-2014 08:12 PM
Quote:
Originally Posted by Aaron Quinton (Post 5326540)
KRE, SDPerf and BES can make them go. I do not have experience with others.
x2, all 3 are very good with that head. Hard to say who is BEST

Tom V.

Scott Stoneburg 12-23-2014 09:13 PM
Quote:
Originally Posted by GTO (Post 5326440)
You prob. seen my flow sheet before but here it is again. For around $3500 back then, it was a good deal.
Not to steal the thread, but Are your heads standard pushrod location?

GTO 12-23-2014 09:36 PM
Quote:
Originally Posted by Scott Stoneburg (Post 5326597)
Not to steal the thread, but Are your heads standard pushrod location?
As far as I know. No shafts either. Harland Sharp rockers and a stud girdle. ... Econo build!

S/st 54 12-23-2014 10:26 PM
Quote:
Originally Posted by GTO (Post 5326613)
As far as I know. No shafts either. Harland Sharp rockers and a stud girdle. ... Econo build!
NICE!

John Langer 12-23-2014 10:52 PM
Quote:
Originally Posted by Aaron Quinton (Post 5326540)
KRE, SDPerf and BES can make them go. I do not have experience with others.
I wouldn't even mention the first 2 with BES...

Aaron Quinton 12-23-2014 11:24 PM
KRE offers a 1075 hp NA option on their site. I'm not aware of SDPerf, BES or yourself offering more?

Quote:
Originally Posted by John Langer (Post 5326656)
I wouldn't even mention the first 2 with BES...

slowbird 12-23-2014 11:52 PM
Quote:
Originally Posted by Aaron Quinton (Post 5326676)
KRE offers a 1075 hp NA option on their site. I'm not aware of SDPerf, BES or yourself offering more?
You know anyone with that engine?
Where did KRE's HP engines qualify in Tom's race at Norwalk?

Aaron Quinton 12-24-2014 12:56 AM
I do not know anyone with that engine. What I do know is if KRE offers the power level it will deliver, I've been on their pump. Do you offer more power with their parts? I don't know anything about Tom's race.

What I do know KRE is the quickest Pontiac 1/4 mile with Pontiac power. They also have the quickest Pontiac powered door car on the planet.

What is your point?

Quote:
Originally Posted by slowbird (Post 5326690)
You know anyone with that engine?
Where did KRE's HP engines qualify in Tom's race at Norwalk?

David Holmberg 12-24-2014 01:14 AM
Gaby did Ryan's Hi ports, BES would be my other thought.
Jim Robertson or Dan are also excellent choices.

R 70 Judge 12-24-2014 02:20 AM
Jim Robertson does nice work. See my signature. Keep in mind it's a pump gas street/strip engine with rockers/stud girdles and not a high compression race piece.

slowbird 12-24-2014 05:53 AM
Quote:
Originally Posted by SLICK1 (Post 5326389)
Not trying to start a battle or debate, just trying to be pointed in the right direction of the person known to be the most knowledgeable with these heads, it can be hand porting or CNC program?

Thanks in advance and Happy Holidays to all.....:cool:
What are your performance goals?

LiL Jack 12-24-2014 07:11 AM
Quote:
Originally Posted by John Langer (Post 5326656)
I wouldn't even mention the first 2 with BES...
Truth!

steve25 12-24-2014 07:36 AM
Why not lay down some criteria first for what the so called BEST is first, are we only going to consider the fastest et and mph per engine cid and car weight?


All times are GMT -4. The time now is 09:50 PM.
Page 1 of 6 1 23 Last »
Show 50 post(s) from this thread on one page