Routing Wire To The Door For PW/PDL
 

Does anyone have a pic if the hole locations for a door jamb wire loom on a 2nd gen Firebird? I have some wire looms as seen in the pic to install for getting wires to the door for windows and locks. There's a dimple that suggests 'Drill Here' but is that correct and then where to punch through the door. Thanks for the help.

Here are some pics of a rusted out 75 TA.

https://www.dropbox.com/s/5z4hye3trb...e%201.JPG?dl=0

https://www.dropbox.com/s/hg8teornz4...e%202.JPG?dl=0

https://www.dropbox.com/s/7jamhcat5a...e%203.JPG?dl=0

I don't think the wiring loom you have is the correct one. It's different from the ones I have and I've seen for these cars.
Here is a link to E-Bay with one that I think is correct.

http://www.ebay.com/itm/70-81-CAMARO...BXUZED&vxp=mtr

https://www.dropbox.com/s/7jamhcat5a...e%203.JPG?dl=0

Thanks for posting the pics. Agreed what I have is not correct but this project is not going for originality. That said, those holes are massive. I can see the knockout on door on mine but had no idea the factory punched a 3" hole to route a few wires.