|
First Gen motor mounts
Just curious what motor mounts people are using in their first gens? I've got stock replacement rubber ones that are about a year old. The new engine move so an awful lot more than the old one did. And I'm not feeling all that corfortable with it.
|
|
|
Some aftermarket mounts also don't have a deep enough hole for the center bolt to seat properly. Rupita-rupita-rupita
|
http://butlerperformance.com/c-13935...rebird-ta.html
Anyone ever use these? Sent from my iPhone using Tapatalk |
I used the Poly mounts from butler. Fit nice, but I've only had my bird together a few weeks, not many miles on the mounts.
|
I use the Butler poly/SS mounts in my racecar and the only complaint is that one of my 2" header tubes melted one of the corners, but didn't interfere with the function. They work good.
|
We used the Butler poly mounts. Had to trim a little sliver off the one corner of the mount on the passenger side. It was rubbing on the long branch.
Sent from my iPhone using Tapatalk |
| All times are GMT -4. The time now is 06:40 PM. |