PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Exhaust TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=422)
-   -   Jones Mufflers (https://forums.maxperformanceinc.com/forums/showthread.php?t=812973)

cnc 12-17-2017 06:36 PM

Jones Mufflers
 
Im looking at doing some tail pipes for the car and need to change out the mufflers to centre outlets

I saw some Jones mufflers on the summit site when I was looking at tailpipes ...
anyone used them ...they seem REAL inexpensive.....

I currently have a Pypes System with there Mufflers that I like but the tail pipes don't fit worth a........
Any input is appreciated...

Lee 12-17-2017 06:57 PM

Quote:

Originally Posted by cnc (Post 5822827)
Im looking at doing some tail pipes for the car and need to change out the mufflers to centre outlets

I saw some Jones mufflers on the summit site when I was looking at tailpipes ...
anyone used them ...they seem REAL inexpensive.....

I currently have a Pypes System with there Mufflers that I like but the tail pipes don't fit worth a........
Any input is appreciated...

If I remember correctly, the "Full Boar" mufflers WERE high quality, made in Arkansas. Then Jones bought them out, and the quality is now suspect.

Might look at Vibrant as well, they are rather inexpensive and supposedly better quality.

Personally, I bit the bullet and bought the Borla ProXS (hope to have them installed next week).

Larry Navarro 12-17-2017 07:45 PM

The Jones/Fullboar mufflers are SS construction, have nice welds and look to be a high quality muffler. I bought mine new from one of the vendors on ebay. $40 each. I figure since Andretti or Foose are not endorse them, I thought I'd take the savings and give them a try.
Exhaust note is of the comparable brands.

https://www.ebay.com/itm/2-O-C-Perfo....c100005.m1851

BLANK1 12-29-2017 01:58 PM

I have the Jones Max Flow mufflers on my car. Sounds great. Nice looking and well built mufflers.

cnc 12-30-2017 05:20 PM

I need to measure the pypes mufflers I currently have to see what size is comparable to them for fitment....thanks for the info ...


All times are GMT -4. The time now is 01:30 PM.