PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   67-79 Big Pontiac TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=431)
-   -   1963 Catalina 15 Inch wheel and tire sizes. (https://forums.maxperformanceinc.com/forums/showthread.php?t=813978)

GtoBrian 01-16-2018 06:23 PM

1963 Catalina 15 Inch wheel and tire sizes.
 
Just picked up a 63 Cat, has all of the orig 14 inch steel wheels but i would like to put 15x7 inch steel wheels on it. What tire sizes will fit front and rear without any issues thnx. The car is factory black with the burgundy tri tone ventura interior, 389 2 barrel 4 speed hydramatic.

tom s 01-16-2018 06:40 PM

Are you sure it has the 4 speed hydro?Cats and GPs got the slimjim trans?The 15in wheels show up on ebay from time to time.They are 5 on 5 bolt pattern.Also be aware if the car is stock the the drivers side lugs are LH and the pass side are RH.Many lugs are broken off by unaware people with with a impact gun.Tom

694.1 01-16-2018 07:29 PM

Pictures! Sounds nice.

GtoBrian 01-16-2018 08:10 PM

Quote:

Originally Posted by tom s (Post 5834965)
Are you sure it has the 4 speed hydro?Cats and GPs got the slimjim trans?The 15in wheels show up on ebay from time to time.They are 5 on 5 bolt pattern.Also be aware if the car is stock the the drivers side lugs are LH and the pass side are RH.Many lugs are broken off by unaware people with with a impact gun.Tom

Thnx for the info Tom, i believe you are correct on the trans, and i was aware about the lugs they are cleary marked.

63 Pontiac 01-16-2018 08:20 PM

225/75/15 should fit. I'll check mine tomorrow.

Stuart 01-16-2018 08:58 PM

You can use 15" wheels from many later model GM full size cars (1971-1976 for sure, with some makes and years newer than that.) They should be plentiful and cheap, but they won't have provisions for the original style dog dish hubcaps that would have been used in 1963 on a 15" wheel.

GtoBrian 01-17-2018 08:48 AM

Thnx for all the info guys, I also see i posted this in the wrong forum. guess i need to get my eyes checked too.


All times are GMT -4. The time now is 07:35 AM.