9799127 XF Water Pump Pulley
 

Super nice satin black powder coated 9799127 pulley for 4 1/2" pumps. Two grooves for power steering cars. The powder coating is scuffed a little where the fan mounts but that won't be visible when installed. Selling because it was on my 69 and I just replaced it with a correct 4 inch pump and pulley. $75 plus shipping

If this is still available, can you get me a front to back measurement?

I have a 9796060-XF now, and looks like it's about 1/2" too shallow for the PS and Alternator belts to line up. Bought a March 13032, but it's still not deep enough.

Front to back is 2.8125" (2 and 13/16 inches)

Hello
 

from my understanding.............

that march pulley is based off the 71 and newer power steering pump
assembly and pulley depths
making it about 3/4 of a belt width off for you
if your using a 67-70 power steering pump with a 67-70 pulley 6900 or 6901
and a 4.5 inch water pump on a 69 n newer timing cover and a 68-70 crank pulley 0842 or 0846
and running no ac

the 9127 is the correct pulley .... 6060 is firebird or short 4" waterpump
and also 68

ole pinion knows these well

we should probably hear from him also soon ........

Scott

goin by memory on pulley numbers but Im close ....and on the road

Thanks for the info! Maybe I'll shoot him a PM, cause I'm not sure where to go from here. This 127 is still too short for me. From my measurements, looks like I need one somewhere in the neighborhood of 3 1/4-3 1/2" deep? The March was around 3 1/8" deep, and still too short.

and
 

we need to know your crank pulley number

and

what year your power steering is

you probably have 71 and newer 481--- crank pulley

get us some numbers and picture of your power steering

Will do! I'll send a PM, or maybe start a new thread so as to not hijack will's for sale thread. lol

No worries, thanks for the bump!

PM sent again...lol

PM replied to

Sold. Thanks Josue!