PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Pontiac - Boost (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=495)
-   -   Roots blower intake from Gutsram? (https://forums.maxperformanceinc.com/forums/showthread.php?t=818492)

69Goat1 05-28-2018 07:14 PM
Roots blower intake from Gutsram?
 
Has anyone successfully made a roots blower intake from a gutsram tunnel ram or is there a better option for wide ports and a roots?

twooldgoats 05-28-2018 10:31 PM
Quote:
Originally Posted by 69Goat1 (Post 5887145)
Has anyone successfully made a roots blower intake from a gutsram tunnel ram or is there a better option for wide ports and a roots?

That's what I run. Bought it used from a board member. Vince Mayeda made several of them several years ago. I run it with Wenzler Super Chiefs. Much better than any other options out there that I'm aware of. Plenty of room for port injectors. Paul Carter port-matched it to my heads when we built my engine. Highly recommend, if you can find one. Vince owns Mayeda Motorsports on the west coast.



Jim

twooldgoats 05-28-2018 10:38 PM
There's pictures, etc. in this thread, if you don't mind wading thru it.:D


http://forums.maxperformanceinc.com/...45#post4763045


Jim

GTOGEORGE 05-29-2018 11:34 AM
Quote:
Originally Posted by twooldgoats (Post 5887231)
That's what I run. Bought it used from a board member. Vince Mayeda made several of them several years ago. I run it with Wenzler Super Chiefs. Much better than any other options out there that I'm aware of. Plenty of room for port injectors. Paul Carter port-matched it to my heads when we built my engine. Highly recommend, if you can find one. Vince owns Mayeda Motorsports on the west coast.

Jim
My BDS intake has been opened up a lot to try to match the intake ports on my HP heads.......still lacking a bit thou!

GTO George

Fast 69 05-29-2018 05:03 PM
Not to highjack the thread but I have a Hogans sheet metal blower manifold I would sell. As far as I have been able to find out, it is one that Mike Cooper had built a few years back. PM if interested.

69Goat1 05-29-2018 08:35 PM
Quote:
Originally Posted by Fast 69 (Post 5887560)
Not to highjack the thread but I have a Hogans sheet metal blower manifold I would sell. As far as I have been able to find out, it is one that Mike Cooper had built a few years back. PM if interested.
Pm sent...


All times are GMT -4. The time now is 07:13 PM.