|
1972 Ventura Street/Strip
1 Attachment(s)
1972 Pontiac Ventura Street/Strip
455, Stock block Edelbrock Heads, 72 cc Stud Girdle Harland Sharp Rockers Victor Intake 950 Dominator Holley regulator Meziere water pump Alternator Aluminum radiator with dual fans HEI with new MSD wires MSD 6AL 5” Recall tach B&M Pro Stick shifter with Line Loc Headers, 3” Flowmasters TCI Midplate/Flexplate Shield New ATI Flexplate New RobbMc starter New steering box TH400 (just rebuilt) Reverse Manual valve body with transbrake 9” Converter B&M transcooler with thermostatically controlled fan SS Braided cooler lines New Interstate battery relocated to trunk Fuel cell with sending unit in trunk 8 point cage with easy access for driver New RCI harness, expires 12/20 Narrowed 12 bolt, tubbed, Moser axles, Perfect Launch Aluminum rear end cover Ladder bars with new heim joints and hardware Mickey Thompson Sportsman Rears 33-21.5-15, Weld Drag Stars15x15s Mickey Thompson Sportsman Front runners with Weld Drag Stars New Afco Double Adjustable Shocks, 150# springs Nice interior, new door panels, new headliner, new carpet, racing buckets New hinge pins installed on doors Body is in very good shape 95% ready for track or drive on the street as is We just spent $3,000 at Farks Supercars in NJ, with the new shocks/springs, new crossmember, ladder bar hardware, set pinion angle, set ride height, chassis squared, front end aligned $25,000 turn key or best cash offer |
Could it be sold as a roller as well or just turn key?
|
Preferably turn key.
But I am open to other offers |
What cam does the motor have?
|
To be honest, I have no idea.
As you can see, there is very little description of the motor. It came with the car and I'm not sure on the internals. |
3 Attachment(s)
OK, I snapped a few more pics.
Found out some info on motor 455 + .030 over = 462" Howard's Cam Solid Roller .720" lift 10.5 Compression KB Icon forged pistons, Flat Top RPM H beam rods Edelbrock heads flow 330 cfm Car has a clean NY title |
Happy New Year.............for somebody??
Ran low 12s in November. Tires have flat spots from sitting (before we bought it). Could not really run it all out. Timing is set at only 30 degrees. Easy low 11 potential. Car is currently in heated garage. You can come buy and look at it at any time. Take it for a ride. We are in the process of building a 10.0 car and do not have the time and/or space to use this one. Price reduced to $24k or best offer. |
I have video for anybody that is seriously interested.
Thanks |
Bump
|
Weight? How many gal is fuel cell?
|
Never got a chance to weigh it. It is all steel, but narrowed. I would guess maybe 3500.
Fuel cell is 12 - 16 gallon. |
Bump. Racing season is here.
|
TTT
|
ttt
|
For those in the New England area, the car will be at the following cars shows:
Sept 8 - Newtown, CT car show Sept 29 - Wallingford, CT POCI car show Thanks |
Open to all reasonable offers
|
Price lowered to $22,000.
|
For those interested, the car will be at the Atco BOP race in NJ next Sunday. November 10.
Motivated seller. |
Spring is here!!!
New Price....... $20,000 or best reasonable cash offer Turn Key bracket car or cruise to the car shows You know you can not build a car for this price. |
Lowered again.........
...............to................ $18,000 |
| All times are GMT -4. The time now is 02:33 AM. |