Driveshaft removal
 

Trying to get the drive shaft removed from my 77 lemans any thoughts besides the back bolts

Sent from my SM-S111DL using Tapatalk

Have you run into difficulty? This is normally pretty easy stuff. Did you try giving it a little smack forward? They can hang up in the yoke...

Have a old yoke handy to put in the trans when you pull the shaft!Or drain it first.Tom

[QUOTE=Flashflood;6231748]Trying to get the drive shaft removed from my 77 lemans any thoughts besides the back bolts

Sent from my SM-S111DL using Tapatalk[/QUOTE

Are you using a hoist or is the vehicle on the ground? If on the ground make sure you’ve blocked the wheels and have set the parking brake so that the vehicle can’t roll away when the driveshaft is out. Once the shaft is out having the transmission in park (or In gear on a manual trans) does nothing to stop the vehicle from rolling away. Safety first.

Got it was a little cab on the u joint next stop removing engine parts

Sent from my SM-S111DL using Tapatalk

Generally recommended to mark it so you can put it back in in the same position.