PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Performance Parts For Sale/Wanted (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=446)
-   -   WANTED SHAFT ROCKER SETUP. (https://forums.maxperformanceinc.com/forums/showthread.php?t=854940)

Darren 639 11-29-2021 10:55 PM
WANTED SHAFT ROCKER SETUP.
 
WANTED shaft rocker set Not offset Please..1:50 to. 1:65 need to fit eddy’s thank you. Pm or 203-650-4188- Darren text or call ok too thank you

racegto65 11-30-2021 01:44 PM
I think I have a spare set of T&D shafts 1.60 and 1.55. I'll check when I get back to the shop and let you know. No offset for standard E heads

duke455 11-30-2021 08:47 PM
Rockers
 
If he's not interested in these I may be
Please let know if he's not.
Thank you

Dragncar 11-30-2021 10:58 PM
Quote:
Originally Posted by racegto65 (Post 6298862)
I think I have a spare set of T&D shafts 1.60 and 1.55. I'll check when I get back to the shop and let you know. No offset for standard E heads
Will these work on High Ports originally set up for std rockers ?

racegto65 12-02-2021 01:33 PM
Quote:
Originally Posted by Dragncar (Post 6299039)
Will these work on High Ports originally set up for std rockers ?
T&D doesn't show any for high ports and this is from kaufman"s web site (do not require special offset lifters or rocker shaft systems.) Best to check with them

Darren 639 12-03-2021 12:26 AM
Thank you race GTO please release the rockers to any other of our PYERS. I was able to acquire a intake rockers from TD I will use my original offset from my system remove the .180’s install .08 on intake from t&d. thank you for everything

racegto65 12-07-2021 01:55 PM
Quote:
Originally Posted by duke455 (Post 6299006)
If he's not interested in these I may be
Please let know if he's not.
Thank you
Duke Darren passed on the rockers so they are still available if your interested

PM also sent

AIR RAM 12-08-2021 12:24 AM
Quote:
Originally Posted by racegto65 (Post 6300693)
Duke Darren passed on the rockers so they are still available if your interested

PM also sent
And if he falls through... I am interested... LOL

SPEED SAFE, NICK

racegto65 12-08-2021 02:10 PM
Quote:
Originally Posted by AIR RAM (Post 6300825)
And if he falls through... I am interested... LOL

SPEED SAFE, NICK
No one has committed yet so they are still available

Darren 639 12-09-2021 06:55 AM
Yes maybe available still? I did pass I bought eight new T&D. Just going to remove the .180s for now.

Darren 639 12-09-2021 06:58 AM
Apache warrior has a brand new set for sale. with 1.7 ratio I have bought stuff from him in the past and it went very smooth. Good guy.

racegto65 12-10-2021 05:21 PM
1 Attachment(s)
Quote:
Originally Posted by racegto65 (Post 6298862)
I think I have a spare set of T&D shafts 1.60 and 1.55. I'll check when I get back to the shop and let you know. No offset for standard E heads
For everyone asking if they fit standard e heads


All times are GMT -4. The time now is 11:36 AM.