12 bolt Moser,428 Short block, round Port headers
 

Moser 12 bolt rear end a body Moser 33 spline axles, true trac posi diff, motive 3.73 gears, aluminum Moser diff cover, 1/2 inch studs, built by Moser, $3000.

Round Port headers 68-72 GTO, 70-81 f body $400.

Bop turbo 400 manual valve body great trans was in my car several years running 10.50s just pulled $1000.

10" Coan converter 3800 stall. $600.

428 Short block, bored over 0.30 new needs assembled new king bearings, total seal Rings, Forged pistons, eagle rods, Arma steel Crank all balanced, new balancer, gasket set, new cam bearings. Double roller timing chain , comp cam , $4000.
419-230-6681

what brand/part# are the headers? got any pics? location?

No name on headers.
Built-in the early 70s

I'm in Ohio

some pics of the headers would help to see the condition or for others determine what they are.

Text me at 419-230-6681
Could not download pictures

Try uploading a couple Headers photos Here: hit the button below " Go advanced " will pull from your photolist, easy.

428 is 4 bolt main ,new ARP studs

In regards to the 428 build specs on the cam and is all the machine work done

428 All machine work is done.
Needs assembled. Still at machine shop should be done soon.
Comp cam hydraulic flat tappet.
Xe284H-10
Int. Ex.
Lift 507-510
Dur 284-296

Is the converter the 20230 or the 20235?

Coan converter
coa-20320-2
New cost $1075.

Can you take a pic of the PN?

Pictures of converter part numbers.
The previous part numbers I posted are the part numbers that Coan supplied me a few days ago when I called them about this converter.

428 Short block is sold

Hi, Do you have the measurements for the rear, outside flange to flange if possible? Where are you located in Ohio? Thanks, Shawn

It's factory width.
I have it in my 70 GTO.
Near Lima Ohio

Is the converter standard space or for a mid plate.

Standard

PM Sent. Thanks, Shawn