PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Pontiac - Street (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=418)
-   -   vacuum pump recommendation (https://forums.maxperformanceinc.com/forums/showthread.php?t=867244)

caddor38 06-13-2023 03:03 PM

vacuum pump recommendation
 
Hey guys,
any body have recommendation on a vacuum pump. It appears my vacuum canister will not provide adequate vacuum to operate my power brakes. I have seen these things go from 50 - 1000 bucks and just want to be get a decent one and be safe.

thanks

TedRamAirII 06-13-2023 10:09 PM

There quite a few late model cars that use a electric vacuum pump. I'm sure they would be cheap from a salvage yard. I cant name one right now, off the top of my head. https://www.amazon.com/Auxiliary-Ele...52944119&psc=1

tstroud 06-13-2023 10:20 PM

Check diesel trucks in the junkyard.
You can buy one new at the auto parts store but they will be a couple hundred bucks.


Sent from my iPad using Tapatalk Pro

caddor38 06-13-2023 11:23 PM

Quote:

Originally Posted by TedRamAirII (Post 6433317)
There quite a few late model cars that use a electric vacuum pump. I'm sure they would be cheap from a salvage yard. I cant name one right now, off the top of my head. https://www.amazon.com/Auxiliary-Ele...52944119&psc=1

Yeah, I have seen that model and was wondering if that would work and give me the vacuum i need?

HWYSTR455 06-14-2023 08:21 AM

9 times out of 10, the problem is the booster you have on the car, leaking, or not enough boost.

You are better off going to a 9" dual diaphragm booster if it's due to low vacuum from cam selection.

Vacuum pumps are problematic, and either don't provide enough boost or 'run out' before you're done needing vacuum. Not to mention most are loud, and vibrate a ton.


.

vertigto 06-14-2023 09:26 AM

Just for reference, the new 9" dual diaphragm booster on my Right Stuff 4 disc conversion wouldn't adequately stop my GTO (couldn't lock 'em up). No leaks. Pulling about 15" at idle. Replacement MC sent (different DIA) and different pads did not make enough difference.

Hydroboost system fixed all that, but obviously not a cheap alternative. Works good though. :)

HWYSTR455 06-14-2023 09:41 AM

Quote:

Originally Posted by vertigto (Post 6433380)
Just for reference, the new 9" dual diaphragm booster on my Right Stuff 4 disc conversion wouldn't adequately stop my GTO (couldn't lock 'em up). No leaks. Pulling about 15" at idle. Replacement MC sent (different DIA) and different pads did not make enough difference.

Hydroboost system fixed all that, but obviously not a cheap alternative. Works good though. :)

Interesting. I would have to suspect there may have been something else off, and the hydroboost masked it. Maybe pin depth/contact is off?

I'm pulling like 13", have a C6 front brake setup on front, 98 SS rear setup, and it def locks 'em up.

Have one on the 442, it has about 14.5", and it will throw you thru the windshield if youre not careful.

.

HWYSTR455 06-14-2023 09:42 AM

I know there was a rash of bad new boosters, maybe you got one of those...

.

David Jones 06-15-2023 01:37 PM

Hydraboost.
https://forums.maxperformanceinc.com...5&d=1482595905

vertigto 06-15-2023 03:02 PM

Quote:

Originally Posted by HWYSTR455 (Post 6433393)
I know there was a rash of bad new boosters, maybe you got one of those...

.

RIght Stuff claims 'no' and wouldn't replace. I am in agreement that it was probably inferior, but wasn't willing to throw more money at it/to them.

I do like the hydroboost and since my GTO is a little left of center (although NM engine/drivetrain), it's all good.

Now to get the failing upper ball joints replaced <sigh>.


All times are GMT -4. The time now is 01:40 AM.