edelbrock fuel rails
 

is edelbrock the only option when it comes to victor efi fuel rails?
i am collecting parts to turbo the 64 at some point in the future looking to be able to street drive it more and the push a button and and run down to the chassis cert, i would say we are going to plan for 1200 hp which should be more than enough to get #3700 pounds down to 8.50 in the quarter, are the edelbrock rails large enough to flow enough e85 to make that much HP?

At only a -6 you may be asking for too much with e85. I only see Edelbrock making a -6 set. https://www.edelbrock.com/fuel-rail-...nish-3634.html

I have -8 Wilson’s rails on mine fed by dual 450’s. My end goal is around 1200hp as well. I suppose it’s possible Wilson’s may already have the measurements for a Pontiac and will make you a set of -8 rails. You’d have to ask them. My conversion was done by my chassis guy using Wilson’s parts.

Wilson’s does the whole conversion with parts for around $950
https://www.wilsonmanifolds.com/page...on-conversions

Contact Mark at Luhn Performance. He made me some rails for my Holley LS Modular intake conversion- they were cheaper than the E-brocks, and came in black anodizing.

Luhn made me rails for my victor. They should be able to duplicate without any issue!

Marren makes rails, converts your intake, and are pretty full service. Have been around a LONG time, quality stuff, and inexpensive compared to most:

https://www.injector.com/cart/pc/home.asp

The did a Pontiac intake for me in the 90s and it was 1st class work.


.

I have had Wilson manifolds install fuel rails on Pontiac intakes. They do a first class job IMO.

Another vote for Wilson….they did a beautiful job on my northwind intake…not cheap though

Funkhouser Race Cars did mine with all Wilson’s parts (-10 rails, stantions, bungs, etc…) for around $825. Going through Wilson’s is your best bet as they will probably have the fastest turnaround time for a full conversion.

Wow, $825 is great for these days, and looks like good work.


.

I just got a Black Friday email from Wilson’s. 20% off parts and EFI conversions! That’s quite a deal. If you’ve been thinking of sending a manifold in for an EFI conversion, now is the time.

Black Friday sale is currently on. 1/2 price!

https://tunethetrilogy.com/blackfriday