Question on installing a new power brake booster.
 

Should there be a gasket or an O-ring between the power brake booster and the master cylinder? The old booster has a cup with the seal for the pushrod on it that extends up and meets with the old master cylinder. The new one I bought from Ames does not have a similar set up. Just just the pushrod seal, which is inside of the booster. . I’m wondering if there should be an O-ring or something to seal this up

Thank you for any help or advice

I don’t know.
Just wanted to say long time no see. It’s nice to see one of the long time members posting again, and find out they still have their car!

I don’t visit here as much as I used to. I kind of put my car on the back burner lately. Had a lot of personal things going on in my life so I’m finally trying to get my butt geared. Do a little bit of work on the car thanks for the kind words.

Hey, I’ve been there.I have 7 kids, so I had to take some time off till life settled down again. Sorry for the thread drift!