Getting wrinkles out of convertible top
 

Anyone have any ideas to get wrinkles out of converable top? Steam?

Is the top installed or are you preparing to install it?

It was installed 9 Months ago. By a restoration shop. It is black.

If you just had the top down and how long it was down it usually takes a day to a week with top up for wrinkles to come out. If you can set it in the sun the heat will take them out faster. If I were you I would go back to the shop that did the install and check with them. Anything you do to it may ruin the warranty.

Some time ago I was doing some research for a 1966 Mustang restoration. I came across an article about Mustang assembly plants. The article that said, in the plant, if they had wrinkles in the convertible top they would use a 1600 watt heat gun. Most home hair dryers are 1200 to 2000. I have used this technique and it works well. The wrinkles may not spring right out, It may take a few days for the vinyl to relax. At least that is what I have found on mine.

If it had wrinkles in it from the shop and they said they would come out over time, they may not. It may be the install. I did my own and I have that issue.