Doug's 2" ceramic coated round port headers
 

Doug's Headers 2" round port headers. Ceramic coated. Website states that they fit '70-'79 Firebirds with a 350 or 400. Also, '71-'76 Firebirds with a 455. I had them on an '81 Firebird with a 421.
Very good condition. $525 plus shipping. I am in NE Ohio.

https://pertronixbrands.com/products...eramic-coating

Thanks,
Joe
330-518-2647

Pics of the headers?

Sorry, I forgot to attach the pics

I’m texting you Joe


Sent from my iPhone using Tapatalk

Thanks for your reply. I realized these will not fit my kickout pan. Nice headers and great price. Joe seems like a great person to deal with as he answered all my questions just so I could turn him down. My apologies


Sent from my iPhone using Tapatalk

No need to apologize. Thanks for the kind words.

Joe

What pan do you have that these wont fit?

Stefs 1240 https://uploads.tapatalk-cdn.com/202...1d5999b3fb.jpg
https://uploads.tapatalk-cdn.com/202...eda47ef074.jpg


Sent from my iPhone using Tapatalk

Ok just curious, I have a Milodon 7 qt pan with kickout and my 2" Hooker super comps fit, the canton might have a bigger kickout though?

Do you have the pan with the sump kickout for cornering ?
His pan is a whole different deal (chassis). The kickout is for a scrapper so the oil has someplace to go besides back on the crank.
I have the Steffs pan with kickout for a scrapper but for a factory A body. And I had to do a whole bunch of modifications to get my Mad Dog 3 piece headers to fit.

The kickout isnt for cornering... mine is the standard 7 qt milodon pan to fit stock 2nd gen firebird chassis, the kick out is on the driver side to allow for the extra capacity, requires loosening the header to install/remove the starter but otherwise headers clear the pan... they are very nice headers but they hang down too low for my taste on a slightly lowered car so Im looking for other headers that tuck up better.

Still available. I can bring them to Norwalk if anyone wants to see them in person. Just let me know.

Thanks,
Joe

Joe, What's the collector size?

The collector is 9 3/4" from the weld at the tubes to the end of the flange. The inside diameter is 3.35". Let me know if you need anything else.

Joe

Sold. Thank you.