PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   68-69 GTO Tempest & LeMans TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=433)
-   -   Rear Coil Spring - Factory Height (https://forums.maxperformanceinc.com/forums/showthread.php?t=882568)

NOVAGOAT 10-11-2025 07:05 PM

Rear Coil Spring - Factory Height
 
I purchased rear coil springs (S364) for my 69 GTO 4-speed hardtop from Ames, and they are a couple inches too tall. I searched other threads here and I see a lot of information, but I still can't figure out which Moog springs provide the correct height. Any pictures that you could provide with Moog part numbers would be most appreciated.

bluejudge 10-12-2025 12:40 AM

Rear springs
 
I think the ones you ordered sit an 1 1/2 higher than the standard springs. I attached a picture of the standard ones in the catalog.

bluejudge 10-12-2025 12:44 AM

Rear springs
 
1 Attachment(s)
I think the ones you ordered sit an 1 1/2 higher than stock if I remember correctly. I attached the one from the catalog that are standard height.

NOVAGOAT 10-12-2025 09:41 AM

Thanks bluejudge. Ames said the "standard ride" and "firm ride" were the same height.

bluejudge 10-12-2025 10:49 AM

1 Attachment(s)
Quote:

Originally Posted by NOVAGOAT (Post 6586168)
Thanks bluejudge. Ames said the "standard ride" and "firm ride" were the same height.

When I spoke with them they told me there was an 1 1/2 difference. There was a conversation on here about Moog 5401 for factory height and that’s what I went with. I posted a picture of my car, I know it’s not a HT but that’s what I put them in. I will try and look for the link on here and see if I can attach it later.

bluejudge 10-12-2025 10:56 AM

Rear springs
 
https://forums.maxperformanceinc.com...d.php?t=511887

NOVAGOAT 10-12-2025 12:11 PM

Great information, bluejudge. Your GTO has the stance I want, and it looks great Thanks!

north 10-29-2025 03:09 PM

I just bought a set of the 363 springs (standard ride) and the car (69 GTO cvt) sits way too high (1.5-2"). I've bought several pairs in past years that sat perfect, perhaps Ames switched suppliers. Both the S363 standard ride and the S364 firm ride say they are stock ride height but this is no longer the case I guess.

propuckstopper 10-29-2025 03:58 PM

Quote:

Originally Posted by NOVAGOAT (Post 6586125)
I purchased rear coil springs (S364) for my 69 GTO 4-speed hardtop from Ames, and they are a couple inches too tall. I searched other threads here and I see a lot of information, but I still can't figure out which Moog springs provide the correct height. Any pictures that you could provide with Moog part numbers would be most appreciated.

I just mentioned this in another recent thread:

Call Coil Spring Specialties if you want an exact height, exact copy GM spring. They are perfect. More money than Moog, but great results the first time. I have full sets on both my cars.

https://www.coilsprings.com/

Gastiresandoil 10-29-2025 04:26 PM

68 GTO here, no a/c, no power brakes, and 4-speed.

Used the common MOOG 5401 springs for the rear and 5380 for the fronts.

https://scontent-sjc3-1.xx.fbcdn.net...mQ&oe=6929FA7E

north 10-30-2025 12:27 PM

A 68-69 GTO with stock tires should measure about 9.5" front and 9.0" rear with a full tank of gas and no occupants in the car. This is measured from the bottom of the rocker molding to the ground about 6" from each end of the rocker molding.


All times are GMT -4. The time now is 08:33 PM.