1980 301 Turbo Conversion to EFI
 

I have a 1980 Turbo pace car
The engine is rebuilt as well as the carb
The unreliable starting on the car is driving me crazy
Rebuilt the carb 2x
I am going to switch to an EFI for reliability

Looking at a unit From Howell EFI Conversion
They have a system that is turbo specific chip

Anyone have conversion experience they can share
As always thanks again in advance

No experience with or really ever heard of Howell EFI. Lots of other name brand EFI set ups out there. Contact TTA for more info on 301T specific EFI, think he has EFI on one of his or customers cars.

Since it is a draw through I would think any TB system would work. My was apart for the previous owner to put a 455 in but it had a Holley 3310 on it in place of the QJet.
Going multiport might be more of a challenge.

Howell is known in the Michigan area. I thought someone there used to work for GM with electronic controls and fuel injection. Supposed to be very good.

I have heard of Howell, I thought he mainly did wiring harnesses to connect to factory computers.

I have a FAST EZ system I'll just about give you! tune for a 327 SBC in it now.