New Top End on 400/406
 

Here are the details of the build using Butler Performance Ram Air Series cam - Roller 041
W72 988 block, .030 overbore for a 406 cubic inches, Stock crank, Eagle forged H-Beam connecting rods, Forged TRW pistons, Holley Brawler 750 Double Pumper, Port matched Edelbrock Performer RPM intake manifold, Edelbrock performer RPM 72cc Heads (Ported), 10:1 compression, Butler's Roller 041 Cam, 1.65 scorpion roller rockers, Comp Cam roller Evolution lifters, round port Doug's headers 1 7/8th primary and 3.5 inch collectors. Exhaust is 2.5 inch mandrel bent pipes with an H-pipe thru Texas T/A mufflers. Estimated numbers are 450HP and 480TQ.

Some of you guys might remember this car. It use to have a performer intake manifold, 6x4 heads and the red headed step child cam in th name of the XE274H-10.
Here is a video link to the new engine and the sound of that lovely lope from the RAIV cam.

https://youtu.be/NGIfSMZC1T8

Nice. Sounds rowdy. Snap, crackle, pop.

John,
Since I moved to Florida, this car has been to several car shows and the reaction to the car is really good. Up in Connecticut it was a Ho-Hum reaction, Down here they often say you don't see these cars anymore.

Ah, good ole Florida. I grew up there, where are you?

Sarasota.

Nice area.