Windshield squirter nozzle mangled
 

Hi Pontiac B Body folks.

I've got a new-to-be '68 Bonneville and have about a page and a half of issues that needs attention. One is the windshield washer system. It all seems to work, maybe, except the driver's side nozzle is detached and mangled. It squirts but is totally bent. I could really use a closeup picture(s) that shows how it and its attached bracket are supposed to look. Then perhaps I could coerce the POS I have back into the correct shape. I expect anything similar including a similar vintage Catalina or Safari would be helpful. I'm new to the Pontiac world so don't know what I'm dealing with.

Thanks in advance,
Bruce Clarkson

PS: Failing that, anyone have one they'd sell?

68 is likely the same. Might be shared with the other divisions as well?
Keep on swinging!

Here's a pair off a '69 Bonneville. I'd think they are the same part, but not sure. If you're in need of them, let me know.

9791354 RH and 9791355 LH 1968 only part number used on all full size models.

I guess this all depends upon if you want a 100% factory correct part. I'm sure you can MacGyver something that will function if not.

Thanks for the replies. I found something that will work. With that in hand, I'm going to attempt to straighten the pretzel that came off the car since I now have a workable backup.