Racing Roller Cam for sale
 

Got this at auction in an unfinished engine. Reached out to Ultradyne and was able to get the specs:
Intake: 279 duration @ .050 .426 lobe lift .648 with 1.52 rockers
Exhaust: 283 duration @ .050 .426 lobe lift .648 with 1.52 rockers

Tech suggested 13-1 CR with a 5500 Stall converter
This is to big for anything I have or will use. Asking $500 and any shipping costs if needed. I will be driving to the Pontiac Nationals in July but will need some kind of deposit to bring it there

Located in Nevada

You need to give lobe separation . Advertised duration would also be useful for those intending on using it with a OEM block. How steep is the ramp kina deal.

Ok Called Ultradyne again. I will say there tech support is awesome. ADV Duration is 310/314 with a LSA at 106. Hope this helps

So, Ultradyne Solid Roller cam. 310/314 Adv Duration, 279/283 duration @ .050 .426 lobe lift .648 with 1.52 rockers 106 LSA

any interest in a lil smaller ud solid roller cam? nib

performerrpm Im interested in a much smaller cam myself

ive got a small 250@ .050 112 lsa on the shelf along...i could dig out out and get a pic of the cam card in a bit

this ones a comp roller. its been used by the looks of it not too much.

I like that cam.Is it for sale?