any one interested in a group purchase on a custom bent molly cage for a 2nd gen TA? cost would probably start at 500 depending on how many points you need. we are getting ready to put 2 in here then take them to a shop to have tig welded. the shop is qouting 4-500 to weld up the entire car , including frame connectors, motormounts and stuff
a general 12 pint cage is going to cost you 190.00 per point to have it done, doing it your self you would be around 1,000.00
we are demensining my cage to have these bent from, anyone who has seen it knows how tightly it fits the car, less than an inch from the dash, and less than 1/4 " from the winshild
anyone interested let me know we would hope to put the order in within 1-2 weeks
the same shop might do a group purchase on a 9" rearend kit as well
they already do the front nose supports like I have ill try to put some photos up
__________________
77 Trans Am All Steel, on 10" tires
8.30 @ 165 mph 3,380 LBS
Mat it! Spray it! Chute it! Just another 8 Second Pass!
|