View Single Post
  #16  
Old 07-18-2005, 03:10 PM
keith h's Avatar
keith h keith h is offline
Senior Chief
 
Join Date: Aug 2003
Location: Peoples Republik of New Jersey
Posts: 370
Default

I think Joe has his wires crossed,the quater's will work on a '69 LeMans,the only difference is that the '69 has the vent's ,these are identical to the factory quater's I cut off,no vent hole,Pontiac crest marker light hole's,if you are going to modify the quater's for a convertible,make sure you take alot of reference measurement's,and photo's you probably know already but,you will have to replicate the contour for the opening so it will clear the power top mechanism,I believe there was a discussion on this a few month's back, if you look from the rear ,and compare the convert to the hard top,it appears that the convert is wider.

__________________


370 Posts and holding...