John, if you are talking about the TA Ram Air hood, depends on what repro you want to go to as there are 3 options at this point:
1. The all fiberglass hood that does not support the RA tubes and pan in the frame.
2.The all fiberglass on top and in frame that support RA pan and tubes.
3.The FG on top steel frame under hood (supports RA pans and tubes).
Another item to mention is the scoops that are molded in on some FG hoods or separate on some. These are a dead give away that the hood is glass. Depends on what you go with. All FG needs some minor block sanding work prior to painting. They have been getting better with this as of late. let me know what is your intent. Of course they go up in price as well for the steel framed units.
__________________
Steve Karew
|