Hello,
Is bypassing the heater core to the rear of intake going to comprimise the motor from cooling properly? My heater core is shot and I have no time right now, putting away for winter - will deal with next spring. I'm taking a 3/4" x 5/8" reducer to run my 3/4" heater hose line from the bottom of water pump to the 5/8" nipple on the back of the intake. 65 LeMans 326 V8 with A/C (not hooked up) 2 spd with Edelbrock Performer Pontiac intake.
Thanks.
Rudy
