If you want to leave the a/c pulley off, here is an Idea that I did on my car. Find another 4 bolt washer (the piece that goes on last on a pulley set up) it's used for reinforcement of the pulley bolt holes, but it also works well as a spacer to move pulleys out away from the hub........ I have one pulley on my racer, it turns the alternator and I used the single a/c pulley to get it done. I spaced the pulley away from the hub with one 4 bolt reinforcement. it's been that way roughly 7 years with no problems!!!!!!
RDRR Custom Fabrications
....A fictitious company doing fictitious work....
__________________
RDRR Custom Fabrications
....A fictitious company doing fictitious work....
|