another way to do this IS place your nuts and bolts in a small metal container ( TIN CAN WITH HOLES IN BOTTOM )AND PLACE THE CAN IN A PLASTIC BUCKET. HOOK UP THE NEG. CLIP FROM A BATTERY CHARGER TO THE CAN THEN TAKE THE POS. CLIP AND HOOK TO A PEACE OF METAL (STAINLESS STEEL WORKS BEST) AND PLACE THIS CLOSE TO THE CAN WITH THE IDEMS BEING CLEANED DON;T PUT THE POS CABLE UNDER WATER NEG. CAN BE UNDER WATER NEXT ADD ONE SPOON FULL OF WASHING SODA ( ARM & HAMMER)FOR EACH GAL OF WATER THIS SPEEDS UP CLEANING BUT YOU DON;T HAVE TO USE THIS THEN TURN ON THE CHARGER 4 AMP SETTING WORKS WELL THIS WILL WORK ON ENGINE BLOCKS ALSO AND ANYTHING THAT NEEDS TO BE CLEANED. ( p.s. IF YOU HOOK UP THE CABLES WRONG THIS WILL SPEED UP THE RUSTING BUT CAN BE CRECTED VERY EASY BY HOOKING THE CABLES BACK UP THE RIGHT WAY SO NOTHING GETS DAMAGED EVEN IF THIS MISTAKE IS MADE YOU WILL FIND THIS IN (HIGH PERFORMANCE PONTIAC MAGISINES) APRIL 2002
|