<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by A1 JUDGE:
I just hate to do it that way because of all the oil that splashes out, but it probably is the only way to be sure they are adjusted correctly. <HR></BLOCKQUOTE>Find an old stock valvecover and trim away just enough of it so that you can adjust the valves, leave the part that will contain the oil spray. Or you can buy a set of 'rocker-stoppers' that clip on the rockers and block the pushrod oiling hole.
__________________
1964 Tempest Coupe LS3/4L70E/3.42
1964 Le Mans Convertible 421 HO/TH350/3.08
2002 WS6 Convertible LS1/4L60E/3.23
1966 VW Type 2 Single Cab Pickup 140hp 2276
1956 VW Type 2 Panel Van 36hp 1200
1957 VW Type 1 Beetle 180hp 2276
|