When I bought new covers for my seats, they were sewn with too little material around those rods so it would have pulled them way too tight. I didnt put the covers on but the place that did just sewed in 2 new rods on the existing ones that were the correct length like the original covers. Im not sure if this is your problem but maybe you should check your original covers if you still have them and see if this is it. Hopefully this helps.
GR-RRR!
__________________
1970 GTO 458 CID .040 over 4 Bolt 428 Block, Forged Eagle 455 Crank, 295 CFM SD KRE D-Ports, SD Old Faithful HR Cam + Comp HR Lifters, PPR Maxx-lite rods, Racetec pistons, PRW 1.65 SS Rockers, 900CFM Holley HP TBI, Performer RPM, Hooker Super Comps, 3" X-Pipe into 2.5" mufflers/tailpipes, 2.75 1st TH400, Continental 13" Converter, 8.5" 3.08 Posi.
Everything installed, fired up and tuning has begun!
|