I've had good luck with drilling a hole all the way through the bolt and then spraying both sides with PBlaster, letting it soak, then using the Easy Out.
For the really tough ones I will heat it up with a bottle torch and alternate between heat and the PBlaster.
Others have said they use the bottle torch to get the bolt really hot and then hit it with candle wax.
__________________
Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same.
-RONALD REAGAN
462 cid/ 6x-4/ TH400/ 3.36:1/ 28x10.5/ 3880#/ 12.35 @ 109.36/ 1.69 60 ft/ 4 wheel disc brakes/ 15 mpg
|