my 70 takes the same ball joints , and they are tough to find. i called kanter and was advised that it would be about the same price to order 4 ball joints as it would to order the entire front end kit. eventually i ended up buying the kit , unfortunately the only thing that i was not satisfied with was the upper ball joints. they had made in mexico stamped on them and the shafts were too long. when the nut was tightened to specs , the cotter pin was at least 1/2 below the nut so there was no way to lock it in. the only ones i have found are NOS on ebay , but be prepared to pay $$$. sometimes you have to buy one at a time to make a set.
|