it would probably be a good thing to remind them to prime the oil preasure before installing the distributer, Spotts sells a killer tool for this, or you can go to autozone and rent one
also might want to check the rear main clearances like we were talking in the other post.
the spray on gasket is a nice way to keep some of the gaskets neet but shouldnt be used on all of them
watch the oil preasure gage on start up if it starts to drop to fast shut it off quick! to save parts
Shim starter on engine stand its much easyer
__________________
77 Trans Am All Steel, on 10" tires
8.30 @ 165 mph 3,380 LBS
Mat it! Spray it! Chute it! Just another 8 Second Pass!
|