Hey Cliff, I'm trying to build the perfect carb or close to it...What do you think of:
Top plate of a '68 wt carb.
body of a 850cfm '76 carb.
bottom plate of a 68 wt carb.
acc. pump cut to get the pump shot.
trimmed throttle blades for more cfm.
.149 needle and seat.
small(est) float and trim 1/4" of bottom of float holder.
and do you have a p/n for the smallest float that will work in this carb body?
I don't have the number on the body but I will get it if this helps.
Thank you,
Guy
|