You might want to give your engine a little more compresson by milling your heads to closer to 90 cc's or buy a new set with smaller chambers and do some pocket porting. Your intake and carb should be OK, although, if your going with a bigger cam (
[email protected]) you may have to modify the carb somewhat.
The extra air/fuel going through the engine will need to get out, so headers are a good bolt on along with 2 1/2 exhaust through good flowing mufflers. Your gearing is going to hold you back, so upgradeing to 3.42:1 posi will wake your ride up nicely.
Almost forgot, your HEI dist. is fine for street or strip, but gains can be had by recurving it.
__________________
"For some reason a glaze passes over people's faces when you say "Canada". Maybe we should invade South Dakota or something."
