"what combo did you have the Lunati cam in, and how did it perform? I have that cam in my 400/400 turbo/670 heads, but I cant seem to get it to run right."
I had the cam in a 406 also but with a turbo 350 w/ a 3000 stall. The shortblock I bought used with federal mogul pistons, rings, and bearings. It had stock rods with arp bolts. I used 670 heads and because of the dish in the pistons the compression ratio was around 9.5. I only got to make around 30 passes due to the short block being assembled too tight and it ate all the bearings. Up top I had a torker II and an 850 holley. This was used in my ventura with 4.56 gears (for a 1000ft). The best time I can remeber was a 10.50 at 98mph. with a 1.83 short time on true radials. With drag radials the car would pull high 1.6 to low 1.7 60 foot times but I never got to try them with the 850 carb instead with 750 w/ vacuum secondaries it still went a 10.60 in the 1000ft. I think that converts to a low 12 sec 1/4 mi time. The motor like to be shifted at 5800rpm.
|