At the link Pdude wrote-
"He says this was actually easier than putting in a Chevy 350 as there was no firewall modification needed and used stock 69 Pontiac mounts located on the crossmember."
You probably need to bolt the upper and lower mounts to the engine and lower the engine into place using the trans as a guide for front to back. Then mark the crossmemeber where the mounts hit and drill it.
__________________
______________________________
1968 Firebird Coupe - 3665 lbs.
350 HO
Long Branch Manifolds
TH350
3.23 open BP axle
PS, PDB and Deluxe interior
GPE Starter ... Small body HEI ... 2.5" Pypes w/X-pipe ... Ruggles Qjet
14.1 @ 99.1
|