Just got back from the shop and everything is OK. I installed the remote with the System 1 filter and then primed the motor again. My 1/2 inch drill got about 50psi on the gage with cold oil. A lot better than 0. Fired the motor and had about 60psi cold at 3000rpm and when it warmed up went to about 40psi at 3000. Drove about 15 miles on and off the throttle and the pressure stayed good. So I guess I had another bad Fram! 2 out of 3. I'm leaving for a small holiday tomorrow and I'm staying away from the Casino! Thanks for all your help. ... Eric
__________________
Runner Up Q16 Norwalk 2013!
|