[Jandro]

It hasn't been zero decked (if i remember correctly). And the valve reliefs... hmm... not sure.

The only info PDUDE has on his site that seem to be the same "treatment" my heads had is the following: "I use the 6X-8 400 Pontiac heads, ported to 245 cfm on the intake side. Raise roof to Ram Air IV specs, elongate pushrod holes, install 7/16" adjustable rocker studs, resurfaced on three sides. Install 2.11 Intake w/oversize 1.77 Ferrea Stainless Steel Valves.
"

9.8 Comp and a Hydraulic Roller cam with a LSA of 110 too much for 93 you think?

Thanks Doug, and anyone else chiming in.