Shaker455
My cam is a comp cam that Jeff Kaufman is turning to 230/240 @.500 with a 112 degree lobe seperation it is a custom grind so I can't find other info but it should come with the cam. The cam seems to be right between a xr276hr and a wr288hr but as I said the lobe seperation is 112 unlike these other cams. I just don't have it right now I was hoping to have it any day. Also my engine is bored .030 over to make it a 462 approx. My flow at each .100 of lift are as follows intake 93@100 165@200 210@300 242@400 265@500 And 267@600 the exhaust side flows 59@100 130@200 158@300 180@400 195@500 and 200@600 Hope this is enough info
__________________
67 Firebird Best time 1.53 60' [email protected] 1/4 [email protected] 1/8 3500lb. leaf springs
|