Welcome to PY board.
To further answer your questions, on the vinyl tops for the '68-72's, when they were added back in the '70's by aftermarket concerns, the oem stainless moldings & corner moldings were not used. Instead the lower moldings were either a molded plastic or dull alum affair that snapped on plastic clips that were rivetted to the body. Fairly easy to spot.
Decklid spoilers... might remove the spoiler, & look at the holes. Factory holes will be punched, owner/dealer installed holes will be drilled. One could also remove the hood tach & look at the hole as well. The factory hole was quite round, not cut out with a saber saw.
__________________
Buzzards gotta eat... same as worms.
|