<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Scott65:
DO loktite them, they can and occasionally will back out. Also, anyone using the TCI flexplate should be aware that the coating they put on these will flake out from under the bolt heads and cause looseness. I found out the hard way on that one. I chipped it off on both sides and retightened to specs WITH red loktite. </div></BLOCKQUOTE>
Yes, i noticed the same when i had to retighten the bolts after using MOLYLUBE *so stupid* as prescribed in the ARP flywheel bolts manual...
Still hangin on tight with medium locktite and shoulder pulled out of the socket!!
|