I too have been doing quarters for 20+ years and just about every kind of repair there is. I have a 70 that I installed at the factory seams with no problem with fit or extra damage to anything. It might take an extra set of hands and eyes if your unsure of yourself. Butt welding is a good repair if you sleeve the seam, which is the correct way to do it. A little more work but the repair will be fine. I chose to install the way the factory did, I believe it is easier and a longer lasting repair. Also, make sure you use weld thru primer on all bare metal areas, Sem makes a really nice brushable.
JMO
John
|