[Nickv]

Well I recieved the cam today along with a set of new crane lifters.

Here are the specs:

Lobe Separation 110
Intake Centerline 106

Advertised Camshaft Specs:

Intake: 304 Lift .500
Exhaust: 312 Lift .522

Duration @ .050

Intake 239
Exhaust 247

Lobe Lift

Intake: .333
Exhauset: .348

Looks like a custom grind from Crower Cams.

I'm thinking of installing this in place of my Crane HMV272 cam in my 406.

406ci,72cc Eheads ported, performer rpm intake, 750dp holley, 1.65 Crane roller rockers, trw pistons with .990 bbc pins, stock rods, polished, shotpeened with arp bolts, 2 bolt mains, studded.

TH400 with 3:23 stock converter.

What do ya think? Good cam? what can I expect?

[ June 13, 2002, 07:15 PM: Message edited by: Nickv ]