I just did one last week. The Comps make it difficult to do anything with, as far as immobilizing, because the rivet for the connecting bar keeps you from getting the lifter apart. Nothing else I could find was the exact same height, so I used a VERY light valve spring for the mock-up. I just watched to make sure it didnt start to move the plunger. It seemed to work O.K. - Bill -
__________________
GT37 3625lbs..Fastest bench seat, column shift, all steel,no power adders car at Norwalk
1.35 w/29.5x10.5x15
6.42 @ 109
10.09 @ 133
|