View Single Post
  #3  
Old 09-26-2002, 06:34 AM
79TA455's Avatar
79TA455 79TA455 is offline
Chief Ponti-yacker
 
Join Date: Jul 2002
Location: Grand Bay-Westfield, NB
Posts: 670
Default

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Ray Cox:
2 bolts on each end underneath,that go into a tab on the door pillar,
take glove box door off, look up inside and where the steel meets the vinal there are litle nuts to screw off about 5 I think
take the dash cover off, screws alon the top,and the cigarett lighter & headlight switch unscrew the outer ring to get the bezle past it, to pull the headlight Knob out there is a button that has to be pushed in on the top of the main body of the switch it helps to go to the parts store and see one first.
1 more screw goes through the dash in the drivers side corner top to the steel part of the dash under the pillar post,
Drop stering wheel first, Ihope i didnt forget any!<HR></BLOCKQUOTE>

Just did this a month or so ago. Don't forget to disconnect your speedo cable and the other stuff connected to your speedo cluster. [img]/infopop/emoticons/icon_wink.gif[/img]