<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">the module is under the distributor body, I guess that means replacing it requires pulling the distributor? </div></BLOCKQUOTE>
You could change the module without pulling the distributor - if you have fingers like an octopus
. It's easier to just pull it, plus that way you can look at your polymer oil pump drive gear to see if it's chewed up. Remember to mark the position of the rotor relative to the cap & dist body before you pull the dist.
Hang in there -
I....think....you're....getting......close!