I run Taylors. Like ALL brands there is not a good fit however with their off the shelf product. Your best fit will be to make your own or shorten an existing set. I paid $13 dollars for a crimping tool and shortened my wires and am well pleased. 6 wires required shortening, from 1 inch to 8 inches and 2 wires were fine. I was even able to reuse all existing boots and metal ends. Doing like I did or making your own wires gives you the ability to run them like you want, where you want, with the ends you want, in the color you want.
__________________
frittering and wasting the hours in an off hand way....
1969 GTO, 455ci, 230/236 Pontiac Dude's "Butcher Special" Comp hyd roller cam with Crower HIPPO solid roller lifters, Q-jet, Edelbrock P4B-QJ, Doug's headers, ported 6X-8 (97cc) heads, TKO600, 3.73 geared Eaton Tru-Trac 8.5", hydroboost, rear disc brakes......and my greatest mechanical feat....a new heater core. 
|