<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Elohssa:
Check to make sure you are using the correct size rope seal, The one for a 400 is bigger than for the 455. I once used the 400 seal in a 455 and ended up cracking the block when I torqued the rear cap down. </div></BLOCKQUOTE>
thanks i previously read the oppisite, that would explain it however this one was never so tight that the block would crack
__________________
70 GTO
462 E-Heads TKO-600 9-Inch/3.60's
|